How to Clean Sex Toys: Any Toy, Any Material

How to Clean Sex Toys: Any Toy, Any Material

November 14, 2026 By FernAmber LaHoud 7 min read

To clean most sex toys, wash them with warm water and mild, unscented soap before the first use and after every use, then let them air-dry completely before you put them away. Waterproof toys can go under the tap. Splashproof toys get a damp cloth instead. Porous materials can’t be cleaned as thoroughly, so they need extra care.

Nobody’s favorite topic. Everybody’s actual problem.

The good news is that once you know the rules, cleaning a toy takes about ninety seconds (less time than finding the charger). Here’s the full routine, broken down by what your toy is made of and how it’s built.

How Do You Clean a Sex Toy, Step by Step?

This covers most toys. Adjust for material and waterproofing using the sections below.

  1. Turn it off. If it has a removable part (a cap, a sleeve), take that off first.
  2. Rinse with warm water. Warm, not hot, to be kind to the motor and the material.
  3. Wash with a mild, unscented soap or a dedicated toy cleaner. (We stock Simply Foam Toy Cleaner by Wicked, $19.99.) Use your fingers to work it into every groove and seam.
  4. Rinse until there’s no soap left. Leftover soap is slippery and not something you want on you next time.
  5. Pat dry with a clean, lint-free towel.
  6. Air-dry fully before storing, and before charging if your toy has charging contacts.

Simply Foam Toy Cleaner pump bottle by Wicked

Do it before the very first use, too. A toy fresh from the box has been through a factory and a warehouse before it got to you.

How to Clean Sex Toys by Material

Material decides how clean a toy can actually get. Nonporous materials have a sealed surface, so soap and water clean them properly. Porous materials have tiny gaps that can hold onto things no matter how well you scrub.

Material Porous? How to clean it Notes
Silicone (medical-grade or body-safe) No Warm water and mild unscented soap or toy cleaner Avoid silicone lube on it
Hard plastic (ABS) No Warm water and mild soap Easy, and holds up well
Glass No Warm water and mild soap Check for chips before every use
Stainless steel No Warm water and mild soap Dry it well
TPE, TPR, jelly, PVC, “mystery” material Yes Warm water and mild soap, and replace it more often A condom over it is the safer habit

If the listing never told you what your toy is made of, treat it as porous.

Every Pikavibe toy is made from medical-grade silicone, so the silicone row is the one that applies to all of them.

Can you boil sex toys?

Some non-motorized toys made from 100% silicone, glass or stainless steel can be boiled, but only if the maker says so. Anything with a motor, a battery or charging contacts never goes in a pot. When in doubt, stick to soap and water.

How Do You Clean a Vibrator?

A vibrator has a motor and a battery inside, so the question is how waterproof it is. Look for the rating on the box or product page.

Fully waterproof toys

A waterproof rating like IPX7 means the toy can be submerged to 1 meter for 30 minutes. You can wash it properly under running water with soap.

Every Pikavibe toy is IPX7, with no exceptions. The roses, Kitty, Fuji, Bubbles, Lulu, Sprinkles: all of them. None of them has a charging port, either. They charge through magnetic contacts, so there’s no hole for water to get into.

Pink Bubbles octopus suction toy on a bamboo bath caddy

After washing, dry the magnetic contacts before you connect the charger. Most of the range uses the same clip-on magnetic charger. Fuji sits on a magnetic charging base instead, so make sure her base is dry as well.

Splashproof or “water-resistant” toys

These can handle a splash and that’s it. Don’t hold them under the tap or submerge them. Wipe them down with a cloth dampened with warm soapy water, then a second cloth with clean water, then dry.

Keep water away from any charging port or battery compartment. If the toy has a battery cap, make sure it’s sealed before you start.

Toys you aren’t sure about

Treat them as splashproof. A toy that turns out to be less waterproof than you assumed stops working permanently.

How Do You Clean Suction Toys and Textured Toys?

Openings and grooves are where lube and everything else collects, so give them extra attention.

For suction toys, run warm soapy water into and out of the opening a few times, then rinse the same way until the water runs clear. If the toy has a removable cap, clean underneath it too. The Blossom Clitoral Suction Rose Toy’s cap comes off, for example, and the Fuji Clitoral Suction Toy has a removable snowcap.

Pink Fuji suction toy with its white snowcap on a teal backdrop

For textured toys, use your fingertips to work soap into every ridge.

Rose toys have their own dedicated guide: How to Clean Your Rose Toy.

What Should You Never Use to Clean a Sex Toy?

  • Alcohol, bleach or harsh household cleaners. They can damage the surface of the toy, and a damaged surface is harder to clean next time.
  • Heavily scented or antibacterial soaps. You don’t need them, and fragrance residue isn’t something you want against your skin.
  • The dishwasher. No toy with a motor survives it, and the heat and detergent are rough on materials. Just no.
  • Silicone lube on silicone toys. It can wear down the surface over time. Water-based lube is the safe default for silicone, and it rinses off more easily too. Ours is Simply Aqua Lube by Wicked.

Simply Aqua water-based lube bottle by Wicked

How Often Should You Clean Sex Toys?

Before the first use, and after every use. Every time, even when you’re tired. (Especially when you’re tired, because that’s when it sits on the nightstand until Thursday.)

Every few sessions, give it a slower clean: get into the seams, under any caps and around the edges of openings.

Wash a toy between partners, and before it goes anywhere else after anal play. If a toy is porous and you share it, use a new condom over it each time.

If something hurts or feels off after using a toy, ask a doctor.

How Should You Dry and Store Sex Toys?

Dry completely before storing. A toy that goes into a drawer damp stays damp.

Store toys so they don’t touch each other, especially if you have any porous ones, since some materials react when they’re pressed together. A pouch per toy is the easiest fix. Every Pikavibe toy comes with one in the box.

Keep them out of direct sunlight, away from heat. A shelf works fine, which suits toys that are cute enough to leave out anyway.

When Should You Replace a Sex Toy?

Replace it if the surface turns sticky or tacky, cracks or tears, or holds a smell that soap won’t shift. Porous toys need replacing more often than silicone, glass or steel, so keep an eye on them.

Go wash whatever’s on your nightstand right now. It’ll take ninety seconds. Want a cleaner made for the job? Get the Simply Foam Toy Cleaner

Simply Foam Toy Cleaner pump bottle by Wicked

Sex Toy Cleaning FAQs

Can you clean sex toys with soap and water?

Yes. Warm water and a mild, unscented soap clean most sex toys well, including silicone, hard plastic, glass or stainless steel. Rinse until no soap is left, pat dry, then let the toy air-dry fully before storing. Skip alcohol and harsh cleaners, plus heavily fragranced soaps, which can damage the surface or leave a residue.

How often should you clean sex toys?

Clean a sex toy before its very first use and after every use. Every few sessions, do a slower, more thorough clean that gets into seams and openings, plus under any removable caps. If you share a toy, wash it between partners. Porous toys need the most care and replacing more often.

Can you put a sex toy in the dishwasher?

No. A dishwasher will ruin any toy with a motor or battery, and the high heat and strong detergent are hard on toy materials in general. Wash toys by hand with warm water and mild, unscented soap instead. Some non-motorized silicone, glass or steel toys can be boiled, but only if the maker says so.

How do you clean a vibrator that isn’t waterproof?

Don’t run it under the tap or submerge it. Wipe it with a cloth dampened in warm, soapy water, then with a second cloth and clean water, and dry it thoroughly. Keep water away from any charging port or battery compartment. Every Pikavibe toy is rated IPX7, so those can be washed under running water.

What is the best material for a sex toy?

Nonporous materials are the easiest to keep clean, because soap and water reach the whole surface. That includes medical-grade or body-safe silicone, hard ABS plastic, glass and stainless steel. Porous materials like TPE, jelly or PVC can hold onto residue however well you wash them. Every Pikavibe toy is made from medical-grade silicone.

Can you use silicone lube with silicone sex toys?

It’s best not to. Silicone lube can wear down the surface of silicone toys over time, and a damaged surface is harder to clean. Water-based lube is the safe default for silicone toys, and it rinses off easily when you wash the toy. If you love silicone lube, use it with glass or stainless steel toys.

From this post

Shop the toys from this post

1 of 3